Driwall™ Masonry Mortar Deflection 2.0-160 is a 1.60 inch (41 mm), three
dimensional geometric patterned core, masonry mortar deflection products
designed to catch and hold mortar droppings. The product allows moisture to pass through but suspends debris above the flashing but below the face of the interior wall in order to allow moisture to flow through to weep holes. Driwall™ Mortar Deflection 2.0-160 is placed in a strip horizontally in a 2.0 inch (5.0 cm) cavity wall. It is designed to be 10.0 inches (25.4 cm) high within the structure. Made from Polypropylene, Driwall™ Mortar Deflection helps PREVENT MOLD and does not absorb moisture like other products made from Polyamide.

Applications • Commercial and Residential masonry cavity walls 2.0 inch thick • Commercial and Residential masonry cavity walls Greater then 2.0 inch with       additional insulation • Stone cavity walls Features & Benefits • Cavity drainage and protection of flashing in one product. • Assures and GUARANTEED to stop moisture from clogging weep holes when     properly installed. • Simple installation with no mechanical fasteners required. • WILL NOT GROW MOLD, Prevents fungus growth and mildew. • Unlike Nylon (polyamide) absorbs NO MOISTURE. • Polymer core resistant to most known corrosive chemicals, including solvents. • Perfect width to suspend mortar droppings above weep holes but below the    flashing connection to the interior wall.

Downloads:     Data Sheet     Installation Instructions     Driwall™ Mortar Deflection          Brochure       Driwall™ Mortar Deflection          Specs     Material Safety Data Sheet