BlockFlash™

The Complete Flashing Solution for Single Wythe Concrete Masonry Unit Walls

BlockFlash is a complete, embeddable flashing solution for managing moisture in exterior single wythe CMU walls. It uses patented flashing pans to collect moisture in the wall and channel it to the exterior through integrated weep spouts. Its included drainage mesh provides hundreds of clear pathways for water to flow around mortar droppings inside the block cells so it can be collected by the pans.
Document TitleDocument TypeDownloadhf:doc_tags
Mortar Net Solutions CatalogBrochures and Flyersbrochures-and-flyers
BlockFlash™ Pan SDSSafety Data Sheetssafety-data-sheets
BlockFlash™ Mesh SDSSafety Data Sheetssafety-data-sheets
BlockFlash™ LEED FormLEEDleed
BlockFlash™ Installation Instructions – EN, SPA, POLInstallation Instructionsinstallation-instructions
BlockFlash™ Test ResultsTesting Resultstesting-results
BlockFlash™ Technical Data Sheet – EN, SPA & POLTechnical Data Sheetstechnical-data-sheets
BlockFlash™ Submittal SheetSubmittalsubmittal
BlockFlash™ Product OverviewBrochures and Flyersbrochures-and-flyers
Mortar Net Solutions – AVITRU MasterSpec Section 042000 Unit MasonrySpecificationsspecifications
Mortar Net Solutions WarrantyLimited Warrantylimited-warranty
Document TitleFile TypeDownload
BlockFlash™ Bond Beam Detailspdf
BlockFlash™ Bond Beam Detailsdwg
BlockFlash™ Lintel Detailpdf
BlockFlash™ Lintel Detaildwg
BlockFlash™ Single Wythe Parapet Detailpdf
BlockFlash™ Single Wythe Parapet Detaildwg
BlockFlash™ Wall Base Detailpdf
BlockFlash™ Wall Base Detaildwg
BlockFlash™ Window Head Detailpdf
BlockFlash™ Window Head Detaildwg
BlockFlash™ Window Sill Detailpdf
BlockFlash™ Window Sill Detaildwg

Features

  • Pans, integrated weep spouts and connector bridges made from high-density polypropylene
  • All 7″ x 14″ drainage mats made of 90% open weave polyester mesh
  • Factory-installed 90% open weave polyester mesh insect guards keep insects out of the block cells
  • Available for 6″, 8″, 10″, and 12″ standard or insulated concrete masonry units
  • Snap-off connector bridge allows fast and easy pan installation in reinforced wall systems and at corners
  • Integrated alignment lip on weep spout makes it fast and easy to accurately align flashing pans with block face
  • Drip spouts include a 45 degree drip edge to deflect moisture away from the wall and help prevent water marks and efflorescence
  • Sloped pans with integrated edge flanges catch and funnel water to the weep spouts

Benefits

  • Complete flashing solution requiring no additional components
  • Lightweight, fast and easy to install
  • Requires no fasteners or adhesives
  • Applicable in all CMU wall flashing locations, including base of wall, parapet walls, and above bond beams, wall openings and structural steel members
  • Cuts labor and material costs associated with using membrane flashing in a multi-wythe course by approximately 50%
  • Eliminates the need for multiple architectural CMU sizes typical with through-wall flashing
  • Helps prevent costly call-backs and repairs due to damage caused by moisture in the block cores
  • Helps protect builders and designers from legal issues resulting from moisture damage
  • Helps prevent mortar damming and provides multiple pathways for water to flow to the flashing pan and out the weeps
  • Insect guard prevents damage related to insects entering the wall through the weeps
  • Maintains 1″ mortar bond between courses and provides a flexural bond strength 10-times stronger than standard through-wall membrane flashing for greater wall integrity
  • Will not degrade, oxidize, or react with other common building materials
  • 40% pre-consumer recycled content of pans and drainage mat helps with LEED certification
  • Light weight and compact shape means convenient shipping, handling and storage

Q: Will BlockFlash® work on a wall vertically reinforced on various dimensioned centers?
A: Yes.  BlockFlash® is designed to work on walls that are vertically reinforced.  The bridge tab on each panel can be snapped off so it will not interfere with the grouted cell.

Can BlockFlash® be used with Half High or Ashler Block?
A: Yes.

Q: How often is BlockFlash® installed in a single wythe wall?
A: BlockFlash® is installed at all flashing levels and at window and door heads.

Q: Does BlockFlash® come in different colors?
A: BlockFlash® only comes in gray.

Q: Can 8” BlockFlash® be cut down to fit 6” CMU?
A: As of May, 2017, 6” BlockFlash is available for 6” CMU and structural brick. 8” BlockFlash cut to fit 6” CMU or structural brick will not function properly.

Q: Are WeepVent™ needed when using BlockFlash®?
A: WeepVent™ are not needed with single-wythe CMU construction.

PART #PANHEIGHTWIDTHLENGTHPANS + DRAINAGE MATS/BOX
02-X-00016″5⁄16″41⁄8″63⁄4″100
02-X-00028″5⁄16″55⁄8″63⁄4″100
02-X-000310″5⁄16″75⁄8″63⁄4″100
02-X-000412″5⁄16″95⁄8″63⁄4″100

Related Project Profiles

Efficient Flashing Restoration at Porter County 911 Call Center

When RestoreWorks faced persistent window leaks at Porter County’s 911 Call Center, they turned to Keene’s TotalFlash® system for a faster, more reliable solution. With pre-assembled panels and expert support, crews cut flashing time nearly in half—saving labor, reducing complexity, and delivering long-term protection with ease.

Need Support?

Contact our Masonry Systems Specialist.

Greg Skyta