Driwall™ Prefabricated Composite Drain 10/045-2

Part Number: 01-X-00145 | Thickness: 0.25 Inches / 10 mm

Drainage Mat for Eliminating Hydrostatic Pressure

DriwallTM Prefabricated Composite Drain 10/045-2 is a 0.25-inch, square grid geometric patterned core, drainage mat designed to eliminate hydrostatic pressure from behind foundation walls, retaining walls, planters and plaza decks, while providing a protection fabric for the waterproof membrane.

The product is produced from an extruded polymer matrix of tangled monofilaments, which are heat-welded at the junctions to form a resilient structure. This structure utilizes a filter fabric to hold the soil away from the wall and core. A fabric is heat-laminated to the surface on one side so that in one step, aggregate for drainage can be eliminated from a construction site.

On the other side of the drain’s three-dimensional core, a protection fabric is heat-laminated. This fabric will act as a protection course to even the way the drain contacts the membrane on the foundation and in one step, provide drainage and protection of the waterproof membrane from damage during back fill.

Document TitleDocument TypeDownloadhf:doc_tags
Driwall™ Prefabricated Composite Drain 10/045-2Technical Data Sheetstechnical-data-sheets
Driwall™ Prefabricated Composite Drain 10/045-2 3-Part SpecificationSpecificationsspecifications
Driwall™ Prefabricated Composite Drain 10/045-2 3-Part Specification (docx)Specificationsspecifications
Driwall™ Prefabricated Composite Drain Installation InstructionsInstallation Instructionsinstallation-instructions
Keene Green brochureBrochures and Flyersbrochures-and-flyers
Limited Warranty Keene Driwall™ Waterproofing SystemLimited Warrantylimited-warranty
Manufactured Drainage Products OverviewBrochures and Flyersbrochures-and-flyers
Document TitleFile TypeDownloadhf:file_type
Below Grade CADs (Driwall PCD & TriDent DD)pdfpdf
Driwall™ PCD Balcony Deck CADspdfpdf
Driwall™ PCD Plaza Deck CADspdfpdf
Driwall™ Prefabricated Composite Drain – CAD Detailspdfpdf
  • Plazas, foundation walls, and planters
  • Shotcrete or gunnite applications
  • Green Roofs
  • Roof Gardens
  • Will protect soft membranes
  • Filtration and drainage in one product
  • Lightweight and easy to handle
  • Simple installation with construction adhesive or termination bar
  • Polymer core resistant to most known corrosive chemicals, including solvents
  • Secondary fabric heat-laminated to the core
  • Wide rolls for one wrap around the residential foundation
  • No expensive seaming, fastening and termination accessories
  • Made with recycled polymer (see LEEDs brochure for value in credits)

Related Project Profiles

Need Support?

Contact our Waterproofing & Drainage Products Specialist.

Chris Tuzzeo