
CompleteFlash® Preformed Corner Boots & End Dams
14″ high inside/outside preformed corner boots for masonry cavity walls that extend above the standard flashing height and make it easy to create a consistently high quality corner every time.
Home > Products > TotalFlash® > TotalFlash® Panel
The patented TotalFlash Cavity Wall Drainage Solution is a complete, factory-assembled masonry cavity wall flashing system that cuts labor costs and provides better performance than standard through wall flashing. It combines a flashing membrane with a mortar dropping collection drainage mat, weep tabs, drip edge and termination bar into a single, easy-to-install panel.
TotalFlash is suitable for use at all flashing locations, including base of wall, above exterior wall openings and bond beams, in parapet walls, and wherever flashing is desirable.
And TotalFlash is more than just a product. Every TotalFlash job includes free services to help make purchasing and installation headache-free, including expert takeoffs, bid help and custom panel sizing for wall openings.
See how TotalFlash helps one masonry professional cut flashing installation time in half in this head-to-head challenge against another masonry professional who uses the conventional method of installing individual flashing components.



| Document Title | Document Type | Download | hf:doc_tags |
|---|---|---|---|
| Mortar Net Solutions Catalog | Brochures and Flyers | brochures-and-flyers | |
| TotalFlash® System Selector | Brochures and Flyers | brochures-and-flyers | |
| TotalFlash® Stainless Steel Panel Submittal Package | Submittal | submittal | |
| Mortar Net Solutions – AVITRU MasterSpec Section 044313.16 Adhered Stone Masonry Veneer | Specifications | specifications | |
| TotalFlash® TPO Membrane Safety Data Sheet | Safety Data Sheets | safety-data-sheets | |
| TotalFlash® Stainless Steel Termination Bar SDS | Safety Data Sheets | safety-data-sheets | |
| TotalFlash® Stainless Steel Drip Edge SDS | Safety Data Sheets | safety-data-sheets | |
| TotalFlash® Rubberized Asphalt Membrane SDS | Safety Data Sheets | safety-data-sheets | |
| TotalFlash® PVC Termination Bar SDS | Safety Data Sheets | safety-data-sheets | |
| TotalFlash® Mesh SDS | Safety Data Sheets | safety-data-sheets | |
| TotalFlash® EPDM Membrane SDS | Safety Data Sheets | safety-data-sheets | |
| TotalFlash® Drip Edge and Corners – Kynar Material SDS | Safety Data Sheets | safety-data-sheets | |
| TotalFlash® Copper Membrane SDS | Safety Data Sheets | safety-data-sheets | |
| TotalFlash® Panel Master Specification | Specifications | specifications | |
| TotalFlash® Panel Test Results | Testing Results | testing-results | |
| TotalFlash® Panel Thermoplastic Polyolefin Panel Submittal Package | Submittal | submittal | |
| TotalFlash® Panel Rubberized Asphalt Panel Submittal Package | Submittal | submittal | |
| TotalFlash® Panel Product Overview (EN, SPA & POL) | Brochures and Flyers | brochures-and-flyers | |
| TotalFlash® Panel LEED TPO Membrane, SS Term, SS Drip Edge | LEED | leed | |
| TotalFlash® Panel LEED Rubberized Asphalt Membrane, PVC Term, SS Drip Edge | LEED | leed | |
| TotalFlash® Panel LEED EPDM Membrane, PVC Term, SS Drip Edge | LEED | leed | |
| TotalFlash® Panel Installation Guide (EN & SPA) | Installation Instructions | installation-instructions | |
| TotalFlash® EPDM Panel Submittal Package | Submittal | submittal | |
| TotalFlash® Copper Laminate Panel Submittal Package | Submittal | submittal | |
| TotalFlash® 304 Stainless Steel Self Adhering Panel Submittal Package | Submittal | submittal | |
| TotalFlash® Panel Technical Data Sheet | Technical Data Sheets | technical-data-sheets | |
| Mortar Net Solutions – AVITRU MasterSpec Section 042613 Masonry Veneer | Specifications | specifications | |
| Mortar Net Solutions – AVITRU MasterSpec Section 042000 Unit Masonry | Specifications | specifications | |
| Mortar Net Solutions Warranty | Limited Warranty | limited-warranty |

14″ high inside/outside preformed corner boots for masonry cavity walls that extend above the standard flashing height and make it easy to create a consistently high quality corner every time.

WeepVents™ are a polyester non-woven mesh vent that are inserted into open head joints to allow moisture to exit the cavity and to help prevent insects.

CellVent for masonry cavity walls helps ensure that moisture can migrate out and air can circulate into the cavity, and that insects can’t enter the cavity through the weep holes.

Mortar Net Solutions’ stainless steel inside & outside corners, and universal end dams help protect from moisture penetration at corners and end of runs in flashing installations. They are manufactured from 26-gauge Type 304 stainless steel for excellent durability and are soldered at joints to ensure leak-proof seams.

Now offering type 304 stainless steel and aluminum termination bar in 8′ lengths. They are also available in the T1 and T2 profile to fit your project needs. We always recommend termination bar to mechanically fasten the flashing.

Mortar Net’s drip edge’s are available in stainless steel, cold-rolled copper, and four colors of Kynar-coated galvanized steel. All come with a 3/8” hemmed edge to create clean-looking edges during installation. Combine with our metal corner drip edges to complete the installation.

Mortar Net Solutions offers metal drip edge corners that match the profile of our drip edge to help maintain the functionality of the flashing installation while creating a clean-looking corner every time.

BTL-1 is a synthetic rubber sealant that is ideal for most construction applications. It produces high-performance joints with both high strength and elasticity.
Q: Do you use MortarNet with TotalFlash?
A: When TotalFlash is used in a masonry cavity wall without continuous rigid insulation, MortarNet is not necessary. When TotalFlash is used in a design where rigid insulation is placed inside the cavity against the interior wall so the insulation covers the vertical face of the TotalFlash, it may be desirable to install MortarNet between the insulation and masonry veneer to ensure mortar droppings can’t create dams.
Q: Is TotalFlash UV Stable?
A: Yes.
Q: Can TotalFlash® be purchased with different individual components?
A: Yes, termination bars can be PVC or stainless steel. Drip edges can be made in copper, stainless steel, Kynar®-coated metal, and with counterflash details. Membranes include EPDM, Thermoplastic Polyolefin (TPO), Rubberized Asphalt, Stainless Steel, and Copper Laminate.
Q: How do I order special termination bars or drip edges?
A: Special TotalFlash® is quoted on a per job basis. For more information, call 219-850-4505.
Q: Does Mortar Net Solutions® assist with a TotalFlash® take-off?
A: Yes. Please contact Steven Fechino, sfechino@mortarnet.com or 219-850-4514 to take advantage of our free takeoff service.
Q: Are end dams required at all door/window heads and flashing terminations?
A: Yes, end dams are required at all flashing terminations.
Q: Can Mortar Net Solutions® cut window and door heads to custom lengths?
A: Yes.
Q: Can TotalFlash® be used on interior and exterior radiuses?
A: Yes. For radiuses, the drip edge is not attached at the factory to the TotalFlash® product. Drip Edges must be field modified by the contractor and then attached to the TotalFlash®.
Q: Can silicone sealants be used with TotalFlash®?
A: No, silicone sealants will not adhere to the TotalFlash® membrane. We recommend BTL-1 butyl sealant from Mortar Net Solutions for all membranes. The color of material is not important.
Q: Is TotalFlash® compatible with air barriers and bituminous damproofing?
A: Yes, TotalFlash® is compatible with all air barriers and bituminous damproofing.
Q: Does TotalFlash® have a warranty?
A: Yes, TotalFlash® has a 10 year limited warranty.
Q: Are there test results for TotalFlash®?
A: Yes, please contact our office for specific test results at 800-664-6638.
Q: Can you order the TotalFlash for a left, right, and a middle piece? This would let us do a window restoration head in three pieces to allow us to keep the shoring on the middle the jambs set up. The window is about 10′ wide.
A: Yes.
| STANDARD THICKNESS | PANEL HEIGHT | PANEL LENGTH | # OF PANELS/BOX |
| EPDM – 0.045″ All other membranes – 0.040″ | 12″ | 5-1/2′ (5′ net) | 10 panels/box |
| 18″ | 5-1/2′ (5′ net) | 10 panels/box | |
| 24″ | 5-1/2′ (5′ net) | 10 panels/box | |
| |||

The TotalFlash take-off service is available to contractors and distributors that are ready to purchase material for an awarded project.
Answer a few questions about your project and a TotalFlash representative will follow up with you to discuss details.

When RestoreWorks faced persistent window leaks at Porter County’s 911 Call Center, they turned to Keene’s TotalFlash® system for a faster, more reliable solution. With pre-assembled panels and expert support, crews cut flashing time nearly in half—saving labor, reducing complexity, and delivering long-term protection with ease.

The ReVISION House Scottsdale project used Driwall™ LathNet to simplify stucco wall installation while boosting drainage, ventilation, and durability. This two-in-one solution enhances energy efficiency, prevents moisture buildup, and supports the home’s sustainable, high-performance design in a challenging remodel.