WeepVent™

Available Colors: Brown, Tan, Red, Almond, White, Gray, Black, and Pebble

Keep Weep Holes Open, Insects and Debris Out

WeepVent for masonry cavity walls helps ensure that moisture can migrate out and air can circulate into the cavity, and that insects can’t enter the cavity through the weep holes.  The product’s compressibility means it can completely fill the weep holes, and “prickly adhesion” holds the WeepVent in place without fasteners or adhesives.
Document TitleDocument TypeDownloadhf:doc_tags
Mortar Net Solutions CatalogBrochures and Flyersbrochures-and-flyers
WeepVent™ LEED FormLEEDleed
Mortar Net Solutions – AVITRU MasterSpec Section 044313.16 Adhered Stone Masonry VeneerSpecificationsspecifications
WeepVent™ Installation Instructions – EN, SPA & POLInstallation Instructionsinstallation-instructions
WeepVent™ Product Overview – EN & SPABrochures and Flyersbrochures-and-flyers
WeepVent™ SDSSafety Data Sheetssafety-data-sheets
WeepVent™ Submittal SheetSubmittalsubmittal
WeepVent™ Technical Data SheetTechnical Data Sheetstechnical-data-sheets
WeepVent™ Test ResultsTesting Resultstesting-results
Mortar Net Solutions – AVITRU MasterSpec Section 042613 Masonry VeneerSpecificationsspecifications
Mortar Net Solutions – AVITRU MasterSpec Section 042000 Unit MasonrySpecificationsspecifications
Mortar Net Solutions WarrantyLimited Warrantylimited-warranty
  • 90% open-weave polyester mesh
  • Available in Brown, Tan, Red, Almond, White, Gray, Black, and Pebble (New)
  • Custom sizes and cuts available on request
  • Sold in easy-tearoff sheets for easy handling on the job
  • Very cost effective
  • 8 different color choices match common mortar colors, eliminate the appearance of dark weep holes and provide a finished look to any building design
  • Standard size WeepVent may be used with both standard and utility bricks
  • Helps prevent spalling from freeze/thaw cycles, efflorescence and wet basements by:
    • Allowing moisture to migrate out of the cavity so moisture can’t build up
    • Allowing air to circulate into the cavity so the cavity can dry quickly
    • Helping prevent pressure differentials, so moisture is not forced into the cavity
    • Preventing insects and debris from entering the cavity and blocking the weep holes
  • Very lightweight and easy to handle
  • Snug, permanent fit without adhesives or fasteners
  • Fast and easy to install in both new construction and restoration projects
  • Can be used at the top of the wall to help improve air circulation in the cavity
  • Will not degrade, oxidize, or react with common building materials, and is treated with a flame-retardant (see test data)
  • 100% compatible with standard weep hole designs
  • Helps prevent call-backs and repairs due to moisture damage in the cavity
  • Helps protect builders and designers from legal issues resulting from moisture damage
  • Clear instructions, extensive product support, and high quality materials help assure installations to specs
  • White, Almond, Tan, and Grey WeepVent contain ultraviolet (UV) stabilizers to resist sun damage

Q: Can WeepVent be used with CMU Veneer?
A: Yes, just tuckpoint the head joint above the WeepVent.

Q: Can WeepVent be used with cut stone?
A: Yes, WeepVent can be used with cut stone, natural stone, and terra cotta.

Q: Can WeepVent be used with brick sizes other than modular brick?
A: Yes, WeepVent comes in 6 sizes.

Q: Can WeepVent be used with metric materials?
A: Yes, WeepVent are available in metric dimensions.

Q: Will WeepVent fade or degrade?
A: No, WeepVent is UV stable.

Q: Will there be any reaction if using a silicone sealant?
A: There will be no adverse effect to a silicone sealant.

Q: Can plastic tubes in an existing building be removed and replaced with WeepVent?
A: Yes, cut the joints, remove the plastic tubes, and install WeepVent with a screwdriver by gently pushing them into the open head joint.

Standard Size and Packaging

THICKNESSHEIGHTLENGTHUNITS/BOXFITS
½”2⅝”3½”125Modular, Norman, Utility

Special Sizes and Packaging

THICKNESSHEIGHTLENGTHUNITS/BOXFITS
½”2″2″125Adhered Veneer
½”3½”3½”125Utility
½”3½”7⅝”125CMU Veneer
½”4″2½”125Ledge Stone
½”4″4″125Closure, Utility, 4″ x 16″

Related Project Profiles

Efficient Flashing Restoration at Porter County 911 Call Center

When RestoreWorks faced persistent window leaks at Porter County’s 911 Call Center, they turned to Keene’s TotalFlash® system for a faster, more reliable solution. With pre-assembled panels and expert support, crews cut flashing time nearly in half—saving labor, reducing complexity, and delivering long-term protection with ease.

Need Support?

Contact our Masonry Systems Specialist.

Greg Skyta